4. QUALITY ASSURANCE PROVISIONS
These limitations are recommended for the protection of personnel against
potential hazards from backscattered laser radiation:
Conduct no test in rain, snow or hail;
Equip all personnel using the rangefinder and all personnel in the
vicinity with laser safety glasses of at least density 4 at 6943
angstroms when testing under these conditions:
a. Morning twilight
b. Evening twilight
c. Daytime heavy fog where visibility is less than 200 meters.
4.1 Respon sibility for inspection. Unless otherwise specified in the
contract, the contractor is responsible for the performance of all inspection
requirements specified herein. Except as otherwise specified in the contract,
the contractor may use his own facilities or any other facilities suitable for
the performance of the inspection requirements specified herein, unless
disapproved by the Government. The Government reserves the right to perform
any of the inspections set forth in the specification where such inspections
are deemed necessary to assure supplies and services conform to prescribed
The inspection requirements specified
4.2 Classification of inspections.
herein are classified l s follows:
First article inspection (see 4.4).
Quality conformance inspection (see 4.5).
4.3 Inspection conditions. unless otherwise specified, all inspections
shall be performed in accordance with the quality assurance provisions of
MIL-F-13926 and the conditions of 3.1.3.
4.4 First article. The requirement for first article approval and the
designation of responsibility for first article inspection to either the
Government or the contractor shall be specified in the contract.
4.4.1 Sample. The first article sample shall be three rangefinders
selected at random by the Government representative from the first fifteen