 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-48595A(AR)
AMENDMENT 2
PAGE 20
4 .6.3.1.1 Basic design (shock), delete and substitute the following:
"4. 6.3.1.1 Basic desire. Use item 2 of Table IX and subject
the rangefinder to the shock test specified in MIL-STD-81O, Method
At the conclusion of the
516.2, Procedure I, Figure 516.2-1.
test, subject the rangefinder to the performance tests of Table
VI."
PAGE 21
*
4.6.3.1.2 High
intensity
(shock),
delete
and
substitute
the
following:
"4.6.3.1.2 High intensity. Use item 2 of Table IX and subject
the rangefinder to the shock test specified in MIL-STD-810, Method
At the conclusion of this
516.2, Procedure IV, Figure 516.2-2.
test, subject the rangefinder to the performance tests of Table
VI . "
PAGE 22
Add the following paragraph:
4.6.5
Interchangeability
The
interchangeability
requirements specified in 3.1.4" shall be satisfied when the
rangefinder is selected as specified in 4.4.1 for First Article
samples and the environmental samples."
NOTE : The margins of this amendment are marked with an asterisk or
vertical lines to indicate where changes (additions, modifications
corrections, deletions) from the previous amendment were made. This
was done as a convenience only, and the Government assumes no
liability whatsoever for any inaccuracies in these notations.
Bidders and contractors are cautioned to evaluate the requirements
of this document based on the entire content irrespective of the
marginal notations and relationship to the last previous amendment.
Preparing Activity:
Custodian:
Army - AR
Army - AR
(project 1240-A968)
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals