26 September 2002
4 May 2001
RESISTORS, FIXED, FILM, ESTABLISHED RELIABILITY,
STYLE RN*56 1/
THIS SPECIFICATION INACTIVE FOR NEW DESIGN AFTER
19 November 1985. FOR NEW DESIGN USE MIL-PRF-55182/1.
This specification is approved for use by all Departments
and agencies of the Department of Defense.
1.1 Scope. This specification covers the requirements for style RN*56 established reliability, fixed, film
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN which is
derived in accordance with MIL-PRF-55182 and is in the following form:
Style and Termination type
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form part
of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement
thereto, cited in the solicitation (see 6.2).
DEPARTMENT OF DEFENSE
- Resistor, Fixed, Film, Nonestablished Reliability, Established Reliability, and Space
Level, General Specification for.
1/ Third letter is variable, dependent upon lead material or capability.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAT, Post
Office Box 3990, Columbus, OH 43216-5000 by using the Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.