 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-81202D(AS)
5.1.1 Level A. The receiver assemblies shall be unit packaged, one each,
in accordance with Method II of MIL-P-116, without the use of the preservation
compound. Immediately after installation of the filter cartridge, each re-
ceiver assembly shall be capped with an external seal cap, Drawing 58A164B806.
Receiver assemblies shall be pressurized at 225 +/-25 psig with nitrogen con-
forming to 3.6.
5.1.2 Level C. Receiver assemblies shall be unit packaged, one each, in
accordance with Method II of MIL-P-116, without the use of preservation com-
pound . Immediately after installation of the filter cartridge, each receiver
assembly shall be capped with an external seal cap. Receiver assemblies shall
be pressurized at 225 +/-25 psig with nitrogen conforming to 3.6.
5.2 Packing. Shipping containers shall be suitable for Level A or Level C
packing as specified in MIL-STD-794.
5.3 Unitized loading. Unitized loading for the receiver assemblies is
authorized as specified in MIL-STD-794.
5.4 Marking. All shipping containers shall be marked in accordance with
the requirements of MIL-STD-129.
NOTES
6.
6.1 Intended use. The nitrogen receiver assembly is intended for use in
storing and delivering, upon demand, high purity nitrogen gas. The receiver
assembly is capable of operating within the temperature range of -54C to
+121C (-65F to +250F).
6.2 Ordering data.
Procurement documents should specify the
6.2.1 Procurement requirements.
following:
Title, number, revision letter and date of this specification.
a.
b.
Government-approved test laboratory (see 3.1.1).
c. First article requirement (see 3.1 and 3.1.1).
d.
Option for removal from AS/QVPL (see 3.2.4.3).
Option for quality reverification (see 3.2.4.3).
e.
Responsibility for inspection (see 4.1).
f.
21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals