 |
|||
|
|
|||
| ||||||||||
|
|  INCH-POUND
MILITARY SPECIFICATION
REEL, SHOULDER HARNESS, INERTIA LOCK
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the dynamic and static performance criteria and testing requirements
for 6 types of shoulder harness inertia reels and subassemblies thereof, for military aircraft.
1.2 Classification. Inertia reels shall be of the following types and they are designated as flight critical
components/subassemblies (see 6.4.7):
MA-1
Unidirectional (see 6.4.12 and Figure 1)
Multidirectional (see 6.4.10 and Figure 2)
MA-2
MA-6
Multidirectional (see 6.4.10 and Figure 3)
MA-8
Multidirectional (see 6.4.10 and Figure 3)
Omnidirectional (see 6.4.11 and Figure 3)
MA-14
MA- I 6
Omnidirectional (see 6.4.11 and Figure 3)
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications. standards and handbooks. The following specifications, standards, and handbooks form
a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents
shall be those listed in the issue of the Departmeent of Defense Index of Specifications and Standards (DODISS)
and supplement thereto, cited in the solicitation.
SPECIFICATIONS
FEDERAL
PPP-B-566
Boxes, Folding, Paperboard
Boxes. Wood, Cleated-Plywood
PPP-B-601
PPP-B-636
Bows. Shipping, Fiberboard
Boxes, Set-Up
PPP-B-676
Beneficial comments (recommendations, additions, deletions) and any pertinent data that may be of use in
improving this document should be addressed to: The Resources and Logistics Services, SA-ALC/TILDM,
Kelly AFB TX 78241-5000 by using the self-addressed Standardization Document Improvement Proposal (DD
Form 1426) appearing at the end of this document or by letter.
FSC 1680
AMSC N/A
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals