Electromagnetic interference: In accordance with MIL-STD-461, class 1D. 3/
Insulation resistance: 1,000 megohms at 500 V dc between each pin and case. 4/
Dielectric strength: 1,000 volts rms at 60 Hz at sea level between case and pins connected together.
Maximum altitude rating: 80,000 feet.
Ambient temperature (operating and nonoperating): -55C to +125C.
Vibration (sinusoidal): 10 Hz to 55 Hz at 0.06 inch DA; 10 g's, 55 Hz to 500 Hz; 20 g's, 500 Hz to
Vibration (random): MIL-STD-202, method 214, condition I, letter C, duration of 30 minutes.
Shock: 1,100 g's for 0.5 millisecond, sine, 3 axes.
Acceleration: 100 g's, 3 axes.
Moisture resistance: MIL-STD-202, method 106.
Dimensions and configuration: See figure 1.
Terminations: See figure 1.
Terminal strength: 3 pounds pull.
Weight: 0.56 ounce (15.7 grams) maximum.
Marking: See MIL-PRF-83726. In addition, relays shall be marked with the ESDS identifier as
specified in MIL-STD-1285.
3/ EMI test limits shall not be exceeded during the timing interval or when continuously energized
under steady-state conditions in accordance with the radio interference requirements of MIL-PRF-
4/ Terminals X1, X2, and A1, A3, and B1 must be connected together during this test. Dielectric
withstanding voltage and insulation resistance are measured between all mutually insulated
terminals and the case.