 |
|||
|
Page Title:
Rack, Bomb; Multiple Ejector, A/A37B-6 Series and Triple Ejector, A/A37B - 5 Series |
|
||
| ||||||||||
|
|  MIL-R-85323(AS)
25 April 1980
SUPERSEDING
AS-2564/AS-2565
23 June 1960
MILITARY SPECIFICATION
RACK, BOMB; MULTIPLE EJECTOR, A/A37B-6
SERIES AND TRIPLE EJECTOR, A/A37B-5 SERIES
This specification is approved for use by the Naval Air
Systems Command, Department of the Navy, and is available
for use by all Departments and Agencies of the Department
of Defense.
1.
SCOPE
1.1
Scope. This specification establishes the requirements
for the manufacture and inspection of two types of bomb ejector racks.
The Type I bomb rack is capable of carrying and releasing Up to three
stores with a total combined weight not to exceed 1,360 kilograms (3,000
pounds). The Type II bomb rack is capable of carrying and releasing up
to six stores with a total combined weight not to exceed 2,040 kilograms
(4,500 pounds). All carried stores shall have suspension lugs spaced
355.6 millimeters (14 inches) apart and shall weigh from 22.7 kilograms
(50 pounds) to 660 kilograms (1,450 pounds). The test limits in this
specification define minimum acceptable capabilities.
1.2
Classification.
Bomb ejector racks, hereinafter called
bomb racks,
covered by this specification shall be of the following
types:
-A/A37B-5 Series Triple Ejector Rack (TER)
Type I
-A/A37B-6 Series Multiple Ejector Rack (MER)
Type II
2.
APPLICABLE DOCUMENTS
The following documents of the
2.1
Issues of documents.
issue in effect on date of invitation for bids or request for proposal,
form a part of this specification to the extent specified herein.
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document
should be addressed to: Engineering Specifications and Standards
Department (Code 93) Naval Air Engineering Center, Lakehurst, N.J.
08733, by using the self-addressed Standardization Document Improve-
ment Proposal (DD Form 1426) appearing at the end of this document
or by letter.
FSC 1095
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals