|
| MIL-R-8592/l
Level B - The cable grips packaged as specified in 5.1.1
5.2.2
shall be packed shipment in fiberboard containers conforming to PPP-B-
636, Class-Domestic, Grade 275 (minimum) or PPP-B-640, Class 1, Grade A or B.
The gross weight of each packed container shall not exceed 90 pounds for the
PPP-B-636 container, nor 200 pounds for the PPP-B-640 container. The closure
and banding shall be accomplished in accordance with the procedure specified
in the appendix of the applicable specification.
Level C - The cable grips, packaged as specified, shall be
5.2.3
packed for shipment in shipping containers that will afford protection
against damage during transit from the supply source to the point of de-
livery. The pack shall, as a minimum, comply with the rules and regulations
applicable to the mode of transportation utilized.
Marking - Interior and exterior shipping containers shall
5.3
be marked in accordance with MIL-STD-129.
6.
NOTES
6.1
Intended use - The helicopter rescue equipment covered by
this specification is used to assist personnel performing rescue work from
helicopter aircraft.
6.2
Ordering data - Procurement documents should specify the
following:
(a) Title, number, and date of this specification.
(b) Whether preproduction inspection is required. (See
4.3.1.).
(c) Quantity.
(d) Selection of applicable levels of packaging and packing.
6.3
Certain provisions of this specification are the subject of'
International Standardization agreement (STANAG 3295 and 3281). When
amendment, revision, or cancellation of this specification is proposed,
the departmental custodians will inform their respective Departmental
Standardization Offices so that appropriate action may be taken respecting
the international agreement concerned.
Custodians:
Preparing activity:
Navy - WP
Navy - WP
Air Force - 84
Army-MO
international Interest (see Section 6)
Review activities:
Navy - WP
Air Force - 11, 84
Army-MO
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |