 |
|||
|
Page Title:
Resistors, Fixed, Wire Wound (Accurate) Style RB54 |
|
||
| ||||||||||
|
|  INCH-POUND
MIL-R-93/12E
5 October 2001
SUPERSEDING
MIL-R-93/12D
22 November 1968
MILITARY SPECIFICATION
RESISTORS, FIXED, WIRE WOUND (ACCURATE),
STYLE RB54
INACTIVE FOR NEW DESIGN AFTER 22 NOVEMBER 1968.
USE MIL -PRF -39005/3.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for style RB54, accurate, wire wound, fixed
resistors.
1.2 Part or Identifying Number (PIN). Resistors covered by this specification are identified by a PIN
which consists of the style of this specification and a coded number. The PIN is in the following form:
RB54
CE12701D
Specification
Coded
style number
number
2 APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of the specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
Beneficial comment s (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN:
DCSS -VAT, Post Office Box 3990, Columbus, Ohio 43216-5000, by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of the document or by letter.
AMSC N/A
FSC 5905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals