 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-1123E
*
5.2.1.4 Type VI.- Each type VI machine, preserved and packaged as
specified in 5.1, shall be packed as specified in 5.2.1.2, except that
skids are not required when contents are immobilized with lumber blocking
and bracing. Each shipping container shall be provided with a type I or
II, grade B or C sealed case liner conforming to MIL-L-10547.
*
5.2.1.5
Type VII.- Three type VII machines, preserved and packaged as
specified
in 5.1, shall be packed in a snug-fitting fiberboard shipping
container
conforming to style RSC, grade V2s of PPP-B-636. Each shipping
container
shall be closed, waterproofed by means of tape, and reinforced
with flat
strapping or tape banding in accordance with the appendix of the
container
specification.
5.2.1.6 Type VIII.- The type VIII stand with lasts, preserved and
packaged as specified in 5.1, shall be packed in the most compact manner
in a snug-fitting cleated plywood or nailed wood shipping container con-
forming to overseas type, type 3 load of PPP-B-601, or class 2, style 2
or 4, type 3 load of PPP-B-621, respectively. Lumber blocking and bracing
shall be used, as necessary, to immobilize the contents within the shipping
container. The blocking and bracing shall not depend on end-grain nailing
alone but supplemental supporting cleats shall be provided to reinforce and
prevent splitting of the blocking and bracing. Each shipping container
shall be provided with a type I or II, grade B or C sealed case liner con-
forming to MIL-L-10547. Each shipping container shall be closed and strapped
in accordance with the appendix of the applicable container specification.
*
5.2.1.7 Waterproofing.- Each type I, II and IV machine shall be covered
with a full-height shroud made of waterproof barrier material conforming
to class E-2, H-1, H-5, or M of PPP-B-1055. All seams of the shroud shall
be sealed with a 3/4 inch minimum width seam of water-resistant adhesive
conforming to MMM-A-260. Fiberboard boxes containing detached components,
tools, and accessories shall be wrapped with waterproof barrier material
and the wrap sealed as specified for shrouds herein. Each interior (see
5.1.1.4.3) nailed wood box containing detached components, tools, and
accessories shall be provided with a type I or II, grade C case liner
conforming to MIL-L-10547.
5.2.2 Level B.-
5.2.2.1 Types I and II.- Each type I or II machine, preserved and
packaged as specified in 5.1, shall be packed as specified in 5.2.1.1,
except that waterproofing shall not be required.
*
5.2.2.2 Type IV.- Each type IV press, preserved and packaged as
specified in 5.1, shall be packed as specified in 5.2.1.2, except that
shipping containers shall conform to domestic type, style A or B of
PPP-B-601, or class 1, style 2 or 4, type 3 load of PPP-B-621; water-
proofing of contents shall not be required.
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals