 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-12511G
performed by the Government, at a site selected by the Government, on sprayers
selected at random from those which have been accepted by the Government and
will not include the previously inspected first article sprayers. In addition
to any test specified as part of the inspection comparison, the Government
reserves the right to conduct any and all other tests contained in this
specification as part of the inspection comparison, and failure of such
additional tests shall have the same effect as failure of those tests specified
as inspection comparison.
4.6.1 Inspection failure. Failure of an inspection comparison sprayer to
meet any requirement specified herein during and as a result of the examination
and test specified in 4.6 shall be cause for rejection of the inspection
comparison sprayer and shall be cause for refusal by the Government to continue
acceptance of production sprayers until evidence has been provided by the
contractor that corrective action has been taken to eliminate the deficiencies.
Correction of such deficiencies shall be accomplished by the contractor at no
cost to the Government on sprayers previously accepted and produced under the "
contract. Any deficiencies found as a result of the inspection comparison will
be considered prima facie evidence that all sprayers accepted prior to the
completion of inspection comparison are similarly deficient unless evidence to
the contrary is furnished by the contractor and such evidence is acceptable to
the contracting officer.
4.7 Inspection of packaging. The preservation, packing and marking for level A
or level B shall be examined and tested to determine compliance with the quality
assurance provisions of MIL-S-1265L. The preservation, packing and marking for
commercial shall be examined to determine compliance with MIL-STD-1188.
5.
PACKAGING
Preservation shall be level A, level B or commercial as
5.1 Preservation.
specified (see 6.2).
5.1.1 Level A. Each complete sprayer shall be preserved in accordance with
the level A preservation and packaging requirements of MIL-S-12651.
5.1.2 Level B. Each complete sprayer shall be preserved in accordance with
the level B preservation and packaging requirements of MIL-S-12651.
Each complete sprayer shall be preserved in accordance
5.1.3 Commercial.
with MIL-STD-1188.
Packing shall be level A, level B, or commercial as specified
5.2 Packing.
(see6.2).
5.2.1 Level A. Sprayers preserved as specified in 5.1, shall be packed in
accordance the level A packing requirements of MIL-S-12651.
5.2.2 Level B. Sprayers preserved as specified in 5.1, shall be packed in
accordance the level B packing requirements of MIL-S-12651.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals