 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-13261G (AR)
3.8 Workmanship. All parts shall be fabricated and loaded in a
thorough, workmanlike manner. They shall be free of burrs, sharp
edges, cracks, dirt., rust and other foreign matter. The cleaning
method used shall not be injurious to any part nor shall the parts
be contaminated by the cleaning agent. Exterior surface coatings
shall be continuous except for a few light scratches not exposing
base material. All required markings shall be neat and sharply
defined.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herein or in the
contract, the provisions of MIL-A-48078 shall apply and are hereby
made a part of this detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
First Article Inspection.
a.
Quality Conformance Inspection.
b.
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the Contracting Officer for evaluation in
accordance with provisions of 4.3.2. The first article sample shall
consist of items in sample quantities as indicated in Table 1.
See MIL-A-48078 and Table 1
4.3.2 Inspections to be performed.
specified herein.
4.3.3 Rejection.
See MIL-A-48078.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals