 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-1399E(AR)
value determined and recorded in accordance with the procedures and
equipment specified in dwgs. 9201136, 9201268, 9201390 and
associated dwgs., 9201392 and 9247071. When measuring tracer
candlepower, the peak reading shall be taken in lieu of the average
candlepower reading specified on dwg. 9201258.
4.5.6 Chamber gaging. The signal assembly shall be gaged with
equipment specified in 4.4.4. Any assembly which fails to comply
with the drawing requirement shall be classed defective.
5.
PACKAGING
5.1 Preservation and packaging.
5.1.1 Level A. Signals shall be packaged in accordance with
dwgs . 8836949 and 8836950.
5.2 Marking. Marking shall be in accordance with dwgs.
8836949, 8836950 and 8796522.
6.
NOTES
6.1 Intended use. The components covered by this specification
are intended for use on the AN-M53A2 thru AN-M58A2 Signals
Illumination, Aircraft Tracer.
See MIL-A-48078.
6.2 Ordering data.
6.3 Submission of Inspection Equipment for Design Approval.
See MIL-A-48078. Submit equipment designs as required to:
Commander, US Army Armament Research and Development Center, ATTN:
DRSMC-QAT-I(D), Dover, NJ 07801.
6.4 Distribution of ammunition data cards. Distribution of
data cards shall include the following: Commander, US Army Armament
Research and Development Center, ATTN: DRSMC-QAT-M(D), Dover, NJ
07801.
6.5 Star burning time. The star burning time is defined as the
time from the appearance of the first colored light from the
illuminant assembly (not the first sputtering light from the
quickmatch or black powder priming charge) until the time that the
light from the star has decreased to approximately less than 10
percent of peak brilliance.
31
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals