 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-21041C
4.3
Examination. Each sample of the sample units selected in accordance with 4.2.2 shall be examined to
verify compliance with the specification. Examination shall be conducted as specified in Table 1. Any units in the
sample containing one or more defects shall be rejected and if the number of defective units in any sample exceeds
the acceptance number for that sample, the lot represented by the sample shall be rejected.
Table 1. Classification of defects in accordance with MIL-STD-105
___________________________________________________________________________________
Categories
Defects
___________________________________________________________________________________
Critical
None.
Major:
Defects 2.5 AQL.
101
Units not new, evidence of reclaimed, used or salvaged material.
102
Camber in excess of 3/16" in a 10 foot length of the metal angle.
103
Accessories not as specified or missing.
104
Hole and slot pattern not as specified.
105
Dimensions not as specified.
106
Gage not as specified.
107
Surfaces or finish not as specified, void of coating, breaks, incomplete finishes, or plating
coats below the required thickness.
Minor:
Defects 6.5 AQL
201
Burrs, ragged edges, impassible or incomplete slots.
202
Handbook of Instructions not as specified.
___________________________________________________________________________________
4.4
Inspection of preparation for delivery. The preservation, packing, packaging and marking of the units
shall be examined and tested to determine conformance with the requirements of section 5 of the specification, and
as required by specifications referenced therein. Inspection lots and sampling shall be in accordance with MIL-
STD-105 with inspection level S-4 with an AQL of 6.5 percent defective.
5.
PREPARATION FOR DELIVERY.
*5.1
Packaging. Packaging shall be level A, B, or C as specified (see 6.2).
5.1.1
Levels A and B. Cleaning, drying, preservation and packaging shall be in accordance with MIL-P-116,
Method III.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals