All applicants for qualification approval shall demonstrate that each of their items conforms to all the
requirements specified in the applicable documents, singularly and in combination with all other
previously qualified items, regardless of manufacturer. When the lens assembly and plug-in switch
modules are qualified to MIL-PRF-22885/52 and /86, qualification and group C inspection of the
multistation switch assembly shall be in accordance with table II.
Extent of qualification: The multistation switch and indicator assembly to be used for qualification
inspection shall be the 3-stations unit (3 X 1 matrix). Qualification of the 3-station units shall qualify all
multistation units up to and including the 20-station unit. The 3-station units shall contain the following
items. Locations of each item in the matrix will be determined by the test activity.
3 X 1 matrix frame (RFI shielded)
2PDT momentary switch module
4PDT momentary switch module
TABLE II. Qualification inspection (group Submission)
Qualification inspection table of MIL-DTL-24317
1 x 3 Matrix
4 from group I
2 from group II 4/
Simultaneity not applicable.
Torque strength of plunger not applicable.
Dielectric withstanding voltage after salt spray not applicable.
Samples shall be subjected to RFI test of MIL-PRF-22885/86.