|
| MIL-S-26688(USAF)
4.4.4 REJECTION AND RETEST. - When one or more items from a
lot fail to meet the specification, acceptance of all items in the
lot will be withheld until the extent and cause of' failure are
determined. After corrections have been made all necessary tests
shall be repeated.
5. PREPARATION FOR DELIVERY
5.1 LEVELS OF PRESERVATION AND PACKAGING
5.1.1 LEVEL A.- Each seat shall be preserved in accordance
with Specification MIL-P-116, method l-C.Unit quantities shall be
one each.
5.1.2 Level C. - Seats shall be preserved and packaged in
accordance with the manufacturer's commercial practice.
5.2 LEVELS OF PACKING
5.2.1 Level A. - Each individual seat preserved and packaged
to meet 5.1.l shall be packed in exterior type shipping containers
meeting PPP-B-621, PPP-B-636, or PPP-B-601. As far as practical,
exterior containers shall be of uniform shape and size, be of
minimum cube and tare consistent with the protection required,
contain identical quantites. The gross weight of each pack shall
be limited to approximately 200 pounds. Strapping and closure
shall be in accord with the applicable container specification and
the appendix thereto. Container shall be provided with a case
liner conforming to Specification MIL-L-10547 and shall be sealed
in accordance "with the appendix thereto. The case liner will not
be required when the unit, intermediate, or external container
conform to Specification PPP-B-636 and is sealed at all joints End
seams, including manufacturer's joint, with tape conforming to
Specification PPP-T-60.
5.2.2 LEVEL B. - Each individual seat shall be preserved and
packaged to meet 5.1.1, and shall be packed in domestic type
exterior containers meeting PPP-B-601. Exterior containers shall
be of' minimum cube and tare consistent with the protection required.
As far as practical, exterior containers shall be of uniform shape
and size and contain identical quantities. The gross weight of each
pack shall be limited as specified in 5.2.3. Containers shall be
closed and strapped in accord with the applicable container specifica-
tion or appendix thereto.
11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |