 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-27447A(USAF)
TABLE I
COMPONENTS
Item
See
No.
Quantity
Description
Requirement
3.2.1
Outer Container
1 ea
1
3.2.3
Intermediate Container
1 ea
2
3.2.3.1
Breather Strip
1 ea
3
3.2.2
Inner Container
1 ea
4
3.2.4
Compass
1 ea
5
3.2.5
Fish Hooks Snell Size 8
2 ea
6
3.2.5
Fish Hooks Snell Size 4
1 ea
7
3.2.6
Knife
1 ea
8
3.2.7
Bag Water Prophylactic
1 ea
9
3.2.8
Matches Safety
10 ea
10
3.2.9
Needles
2 ea
11
3.3.4
Pads Fire Starting
4 ea
12
3.2.11
Corrosion Resistant Steel Wire
1 ea (20 ft)
13
3.2.12
Striker Strip
2 ea
14
3.2.13
Instructions and Contents Sheet
1 ea
15
*3.2.1 Outer container. The outer container shall conform to Figure 1 and
shall be fabricated from material conforming to MIL-C-577, type II, color sage
green. The outer container shall consist of a closed stitched pocket with two
flaps on one end of the container.
*3.2.1.1 Stitches, seams and stitchings. Stitches, seams and stitching shall
conform to FED-STD-751. Thread breaks, skipped stitches and bobbin runouts
shall be repaired by beginning 1/4 inch in back of the defective area and
continuing 1/4 inch beyond the defect.
*3.2.1.2 Flaps. The flaps shall be overedge stitched with stitch type 504,
stitching type Efd-1, 1/8 inch gage. 12 +1 stitches per inch. The cotton
thread
shall conform to type IA3, ticket No. 24, 4 ply of V-T-276.
*3.2.1.3 Edge seam. The pocket edge seam shall be stitched with a single row
of stitch type 301, seam type SSa-1, 3/16 inch gage, 14 + stitches per inch.
The polyester thread shall conform to type 1, class 1, size E of V-T-285. The
seam and stitch shall extend onto the flap area so that the ends of the
overedge stitching are caught in the seams (see Figure 1). The ends of the
type 301 stitch shall be backstitched a minimum of 3/8 inch.
*3.2.2 Inner container. The inner container material shall conform to PPP-B-
566. The dimensions shall be 1/2 +1/8 inches by 1-1/4 inches by 5 +1/8
inches.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals