 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-45152H
* 3.5 Dimensions and clearances. The semitrailer, without payload, uncoupled from the
towing vehicle, resting on its landing legs on level ground, and with the platform level, shall
conform to the dimensions specified in table IV and the following:
(a)
Length of usable loadspace, feet (minimum) (NOTE: SEE 3.5.1)
For type I and II . . . . . . . . . . . . . . . . . . . . 16
For type V . . . . . . . . . . . . . . . . . . . . . . . 25 or 40,
as specified
(see 6.2)
(b)
Upper fifth wheel height, from the ground to
the underside of the upper fifth wheel plate,
inches, plus or minus 1 inch
For size 15, 20, and 25 . . . . . . . . . . . . . . . . 48
For size 35 . . . . . . . . . . . . . . . . . . . . . . 52
For size 50 and 60 . . . . . . . . . . . . . . . . . . 56
*
For size 75 . . . . . . . . . . . . . . . . . . . . . . 58
*
(c)
Distance from front of semitrailer to vertical
centerline of kingpin, inches, plus or minus 2 inches
For type I and II. . . . . . . . . . . . . . . . . . . . 18
For type V. . . . . . . . . . . . . . . . . . . . . . . 22
(d)
Turning clearance, from the centerline of
kingpin to any portion of semitrailer 6 inches
or more below upper fifth wheel plate, inches
(minimum) . . . . . . . . . . . . . . . . . . . . . . . 82
(e)
Forward swing clearance, from center of
kingpin to most distant point on semitrailer
nose, inches (maximum)
For type I and II . . . . . . . . . . . . . . . . . . . 60
For type V . . . . . . . . . . . . . . . . . . . . . . 56
(f)
Ground clearance, to bottom of frame rails,
inches (minimum)
For type I and V . . . . . . . . . . . . . . . . . . . 15
For type II . . . . . . . . . . . . . . . . . . . . . . 9
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals