 |
|||
|
Page Title:
Table I. Classification of Defects |
|
||
| ||||||||||
|
|  MIL-S-45669A(MU)
of MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies.- All components and subassem-
blies shall be inspected in accordance with the inspection provisions
contained in Supplementary Quality Assurance Provisions (SQAP) listed
in the technical data package (TDP). In the absence of SQAP's, the
applicable Quality Assurance Provisions of MIL-F-13926 shall apply.
Examination, and tests related to Section 3 herein shall be performed
on a single defect (individual characteristic) basis in accordance with
MIL-STD-105 and the sampling plans specified in Tables I, II and III
herein. Examination and tests for packaging, packing, and marking shall
be in accordance with MIL-P-14232 and Section 5 herein. The tabulated
classification of defects in Table I, II and III shall constitute the
minimum inspection to be performed by the supplier after first article
approval and prior to Government acceptance or rejection by item or lot.
TABLE I - CLASSIFICATION OF DEFECTS
CLASS
REQUIREMENT
TEST PROCEDURE
CRITICAL: NONE
MAJOR : AQL 0.65% Defective
101.
Vibration
3.5
4.6.1
102.
Orientation
3.6
4.6.2
Collimation
103.
3.7.1
4.6.3
104.
Parallelism of reticle and image
3.7.3
4.6.5
Cross level vial
105.
3.7.4
4.6.6
106.
Elevation level vial
3.7.5
4.6.7
107.
Telescope travel
3.8
4.6.8
108.
Torque
3.10
4.6.11
109.
Strap assembly
3.11
4.6.12
110.
Plumb travel
4.6.4
3.7.2
None Defined
MINOR:
NOTE: The tests in Table
shall be conducted at a temperature be-
I
tween +60 and +90F.
4.3.3 Acceptance and rejection.- Rejected lots shall be screened
for all defective characteristics. Removal or correction of defective
units and resubmittance of rejected lots shall be in accordance with
"Acceptance and Rejection" as specified in MIL-STD-105.
-5-
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals