 |
|||
|
|
|||
| ||||||||||
|
|  4.5.2.3
4.5.2.3.1 Decarburization. Microexamination of the specimens for
shall be
at a magnification of 100 diameters.
4.6
Rejection.
4.6.1 Rejection. Unless otherwise specified (see 6.2) where one or more
test specimens fail to meet the requirements of the specification the lot
represented by the specimen or specimens shall
subject to rejection.
4.6.2
When no
plan
provided or approved by the
procuring agency (see 6.2) and where there is evidence that indicates that the
of the lot of material, and when the detail
specimen was not
specification does not otherwise specify, at
two
shall be
seleoted to replace each test specimen which failed. All specimens so
selected for
shall meet
requirements of the specification or the
lot shall
subject to rejection,
PACKAGING
Strip shall
prepared
shipment in accordance with
5.1 Preservation.
levels A, B, or
(defined In
Levels A and
Strip shall be coated with a preservative
lubricating oil conforming to MIL-L-3150.
5.1.2 Level C. Strip shall
protected in accordance with general
industry practice with a suitable anti-rust
Packing.
shall be packed for shipment in accordance with level
A,
or C
specified (see 6.1).
5.2.1 Level A.
Strip
be packed in accordance
requirements
of MXL-STD-163.
Level c. Strip shall be packed in a
to insure carrier
acceptance and eafe delivery at destination.
5.3 Marking for shipment. In addition to marking specified in the contract
or order, marking for shipment shall
in accordance with the
of
6.
NOTES
6.1
data. Purchasers should select the preferred options
permitted herein and include the following
in procurement
documents:
Title, number, and date of this specification.
Chemical
(see 3.2).
Hardness
or tensile strength
If other than scaleless, tempered finish is required (see 3.5).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals