 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-464F(ME)
144.
Repair parts not preserved in accordance with the referenced document
as specified in level A.
145.
Consolidation not as specified for level A.
146.
Strapping not as specified for level A.
147.
Preservation not in accordance with the referenced document specified
for commercial~
148.
Marking missing, illegible, incorrect or incomplete for level A or
commercial.
PACKAGING
5.
Preservation shall be level A or commercial as specified
5.1 Preservation.
(see 6.2).
5.1.1 Level A.
5.1.1.1 Disassembly. The operator's platform, truck hitch assembly and
block-off plates shall be removed. Further disassembly sshall be only to the
extent necessary to safeguard parts vulnerable to damage, pilferage or loss.
Removed bolts, nuts, pins, washers, etc., shall be reinstalled in-mating parts
to prevent their loss.
5.1.1.2 Unprotected surfaces. Unpainted exterior metal surfaces of items,
components, and assemblies, such as bolts, nuts, washers, roller, levers, hitch,
block-off plates, cutoff shoes, chains, and any other exterior metal surface
requiring a contact preservative in accordance with MIL-P-116 shall be coated
with type P-1 preservative. The preservative shall conform to the applicable
specification listed in and shall be applied in accordance with MIL-P-116.
5.1.1.3 Tires. Preservative shall not be applied to the tires. Transport
tires shall be inflated to 10 percent above the specified pressure; other tires
shall be inflated to two-thirds of the specified pressure.
5.1.1.4 Technical publications. Technical publications, if furnished, shall
be preserved in accordance with MIL-P-116, method IC-1 or IC-3.
5.1.1.5 Maintenance tools. Maintenance tools shall be preserved in accordance
with the level A requirements of PPP-P-40, and placed in the toolbox.
5.1.1.6 Repair parts. The preservative application criteria and applicable
method(s) of preservation of MIL-P-116 shall be used to preserve the repair
parts. The repair parts shall be placed in the toolbox as space permits.
5.1.1.7 Consolidation. The operator's platform and the truck hitch assembly
shall be placed and secured in the hopper. The repair parts, maintenance tools,
technical-publications, block-off plates and any other loose or removed compon-
ents shall be placed in the toolbox as space permits. Items that will not fit
in the toolbox shall be consolidated in a close fitting box conforming to
PPP-B-601, overseas type, style optional. Box strapping is not required. The
box shall be secured in the hopper or in any other location convenient for
securing that will not increase cubage or interfere with lifting or towing of
17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals