 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-464F(ME)
purchse order requirements. Deliverable data required by this specification is
cited in the following paragraphs.
Paragraph No.
Data requirements
Applicable DID NO.
a. 3.28
Camouflage Pattern
UDI-V-24003/M
Photos
(see figure 1)
Camouflage Pattern.
DI-M-30420/M
b. 3.28
Illustrations
(see figure 2)
6.3 First article, When a first article inspection is required, the items
should be a preproduction model. The first article should consist of one
spreader. The contracting officer should include specific instructions in acqui-
sition documents regarding arrangements for examinations, tests and approval of
the first article test results and disposition of the first article documents.
6.4 Lubricants. MIL-STD-838, Lubrication of Military Equipment, prescribes
the policy for using specification-type products wherever possible and provides
specific requirements for potential use of non-standard proprietary products.
MIL-STD-838 is implemented by MIL-HDBK-113, Guide for the Selection of
Lubricants, Fludis, Preservatives and Specialty Products for Use in Ground
Equipment Systems. The contracting officer should note that unless otherwise
authorized by the US Army Belvoir Research & Development Center (ATTN:
STRBE-VF), lubricants, fluids, and greases for ground equipment systems must be
restricted to those listed under chapter 2 of MIL-HDBK-113.
6.5 Government-loaned property. The contracting officer should arrange to
loan the dump truck specified in 3.7 and 4.5.2.1, and tO furnish the property
listed in 3.28.
6.6 Degrees of packing have not been specified as the packing specified is
applicable for all degrees of packing. For purposes of preservation/packing
level marking the marking shall be level A.
Custodian:
Preparing activity:
Army - ME
Army - ME
Review activities:
Project 3895-A222
Army - AT
DIA - CS
19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals