 |
|||
|
Page Title:
Switch, Alarm, Latching, SA-1954/FSS-9 (V) |
|
||
| ||||||||||
|
|  INCH-POUND
MIL-S-52860D
6 December 1990
SUPERSEDING
MIL-S-0052860C(ME)
21 Aug 84 and
MIL-S-52860B
25 April 1979
MILITARY SPECIFICATION
SWITCH, ALARM, LATCHING, SA-1954/FSS-9(V)
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers a floor or wall mounted manually
operated duress switch which allows an alarm to be initiated by its operator
when placed under duress. It is a component of the Joint-Services Interior
Intrusion Detection System (J-SIIDS).
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are needed to meet the
requirements specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While
every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents
cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications and standards form a part of this specification to the extent
specified herein. Unless otherwise specified, the issues of these documents
shall be those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the
solicitation.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
USA Communications-Electronics Command, CECOM RDE Center, ATTN:
AMSEL-LC-IEW-D-ED, 10115 Gridley Road Suite 228, Fort Belvoir, VA 22060-5849
by using the self-addressed Standardization Document (Improvement Proposal (DD
Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 6350
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals