|
| MIL-S-62359(AT)
29 July 1983
MILITARY SPECIFICATION
SEMITRAILER, BOTTOM DUMP: 18 TO 22
CUBIC YARD CAPACITY, COMMERCIAL
This specification is approved for use by the US Army Tank-Automotive Materiel
Readiness Command, Department of the Army, and is available for use by all departments
and agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers tandem axle, single and dual hopper, bottom dump
semitrailers with minimum struck capacities of 18 to 22 cubic yards. Semitrailers procured under
this specification are commercial items which shall be warranted by the manufacturer as specified
in procurement documents.
1.2 Classification. Semitrailers shall be of the types and sizes shown in table I, as
specified (see 6.2):
TABLE I. Semitrailer classification.
Type
Nomenclature
Size
I
Single hopper, single
18, 20
gate, spreader type
II
Single hopper, single
18, 20
gate, windrow type
III
Dual hopper, dual
20, 22
gate, spreader type
IV
Dual hopper, dual
20, 22
gate, windrow type
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: US Army Tank-Automotive
Command, ATTN: DRSTA-GBS.1, Warren, MI 48090, by using the self-addressed
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
FSC-2330
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |