Quality conformance inspection.
4.4.1 Inspection lot formation.
The minimum lot size is 8,000
22.214.171.124 Minimum lot size.
The examinations/tests listed herein shall
be performed on inspection lots as defined in 4.4.1 of this
a. Samplinq plans. Unless otherwise specified in the
Classification of Defects and Test Tables, sampling plans and
procedures shall be in accordance with MIL-STD-105, Level II.
b. Each environment Test Samples shall pass the
accept/reject criteria for each specified environment.
c. The sum of all samples test fired (5 tests for a total
of 315) shall pass an accept/reject criteria of 315-7-8.
d. A Simulator is classified a functional failure if it
fails any of the requirements of Para.3.5.1.