 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-70536 (AR)
3.6 Workmanship. All parts and assemblies shall be fabricated
and finished in a thorough, workmanlike manner. They shall be free
of burrs, chips, sharp edges, cracks, crazes, porosity, warpage,
burn marks, blisters, excess flash, scratches, dirt, grease and
other defects and foreign matter which would affect appearance or
serviceability. The cleaning method used shall not be injurious to
any part nor shall the parts be contaminated by the cleaning agent.
All required markings shall be neat, legible and sharply defined.
All packing components shall be dry.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herein or in the
contract, the provisions of MIL-A-48078 shall apply and are hereby
made a part of this detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
First Article Inspection
a.
b.
Quality Conformance Inspection
First article inspection
4.3
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the Contracting Officer for evaluation in
accordance with provisions of 4.3.2 and 4.3.3. The first article
sample shall consist of the following items in sample quantities as
indicated:
Part Description
Drawings
Match and Cable Assembly
9354515
Plug, Electrical Assembly
9342154
Cap, Short Circuit
9342157
Container
9390379
Simulator Target Kill Assembly
9390392
12556037
Interface, Igniter Assembly
9390395
Composition, Black Smoke
9390396
Composition, Ignition
Marking Drawings
9390398
4.3.2 Inspections to be performed.
See MIL-A-48078 and Table 1
specified herein.
4.3.3 Rejection.
See MIL-A-48078.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals