 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-70538A(AR)
4.1.2 General Provisions. Unless otherwise specified
herein, the provisions of MIL-W-13855 apply and form a part of
this specification. Reference shall be made to MIL-STD-109 to
define quality assurance terms used herein.
4.2 Classification of inspections. The inspection
requirements specified herein are classified as follows:
First article inspection (see 4.3).
a.
b.
Quality conformance inspection (see 4.4).
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first
article sample for each mold cavity to be used in production as
designated by the Contracting Officer for evaluation in
accordance with provisions of 4.3.2. In first article sample
shall consist of the assemblies, components and test speciments
listed below in the quantities indicated.
Quantity
Drawinq
Name
50
9352577
Magazine
9352576
50
Cover
50
9352578
Feedstrap
4.3.2 Inspections to be Performed. As determined by the
Government, the first article assemblies, components and test
specimens may be subjected to any or all of the examinations and
tests specified in this detail specification and be inspected for
compliance with any or all requirements of the applicable
drawings.
4.3.3 Rejection. Failure of any item to meet the drawing
requirements, acceptance criteria fo Table I, or the referenced
paragraphs shall result in rejection of the first article.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals