 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-70685(AR)
3 . 3 . 2 Protective coating. Protective
coating used in
construction of the slip ring assembly shall
be in accordance
with dwg. 8437092 and associated drawings.
3.3.3 Product marking. The slip ring assembly shall be
marked in accordance with Dwg. 8437092. C o nnector designations
shall be marked in accordance with dwg. F8437092.
3.3.4 Workmanship.
Workmanship
shall
be
in
accordance
with
MILSTD-454.
3.5 First article inspection. When specified in the
contract or purchase order, a sample shall be subjected to
first article inspection in accordance with the technical
provisions herein (see 4.3).
4.
QUALITY
ASSURANCE
PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified, in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements
as specified herein. Except as otherwise specified in the
contract or purchase order, the contractor may use his own or
any other facilities suitable for the performance of the
inspection requirements specified herein, unless disapproved by
the Government. The Government reserves the right to perform
any of the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items must meet
all requirements of sections 3 and 5. The inspections set forth
in this specification shall become a part of the contractor's
overall inspection system or quality program. The absence of
any inspection requirements in the specification shall not
relieve the contractor of the responsibility of assuring that
all products or supplies submitted to the Government for
acceptance comply with all requirements of the contract.
Sampling in quality conformance does not authorize submission
of known defective material, either indicated or actual, nor
does it commit the Government to acceptance of defective
material.
4.2 Classification of inspections. The
inspection
requirements specified herein are classified
as follows:
First
article
inspection
(see
4.3).
a.
b.
Quality
conformance
inspection
(see
4.4).
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals