 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-71146 (AR)
4.1.1 Responsibility for compliance. All items shall meet all
requirements of sections 3 and 5
The inspection set forth in this
specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection
requirements in the specification shall not relieve the contractor
of the responsibility of ensuring that all products or supplies
submitted to the Government for acceptance comply with all
requirements of the contract. Sampling inspection, as part of
manufacturing operations, is an acceptable practice to ascertain
conformance to requirements, however, this does not authorize
submission of known defective material, either indicated or actual,
nor does it commit the Government to accept defective material.
4.1.2 General provisions. Unless otherwise specified herein,
the provisions of MIL-A-48078 apply and form a part of this .
specification. Reference shall be made to MIL-STD-109 to define
quality assurance terms used herein.
4.2 Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First Article Inspection.
(see 4.3)
b.
Quality Conformance Inspection.
(4.4)
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the Contracting officer for evaluation in
accordance with provisions of 4.3.2. The first article sample shall
consist of the assemblies, components and test specimens listed
below in the quantities indicated:
Part Description
Drawings
Quantity
Case
11749631
5/cavity
Tube
11749635
25
Closure, Switch
10
11749641
Closure
11749638
5/cavity
Disc, Separator
11749637
25
Pellet Assembly
11749633
5
End Plate
11749632
5/cavity
Packing & Marking
9344297
1 box/150
Simulator, Launching, Anti- Tank,
Guided Missile and Rocket
M22
175
12953563
4.3.2 Inspections to be performed. As determined by the
Government, the irst article assembl ies, components and test
specimens may be subjected to any or all of the examinations and
tests specified in this detail specification and be inspected for
compliance with any or all requirements of the applicable drawings.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals