|
| MIL-S-81054A(OS)
SPECIFICATIONS
Aerospace Material Specification (AMS)
Tolerances - Alloy Steel Bars
AMS 2251
AMS 2300
Premium Aircraft Quality Steel Cleanliness
Aircraft Quality Steel Cleanliness
AMS 2301
AMS 2808
Identification, Forgings
*
(Copies of Aeorspace Material Specifications may be obtained from
the Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warren-
dale, Pa. 15096,)
American Society for Testing and Materials (ASTM)
*
Compression Testing of Metallic Materials at
ASTM E 9
Room Temperature
Determining the' Inclusion Content of Steel
ASTM E 45
*
Estimating the Average Grain Size of Metals
ASTM E 112
*
End-Quench Test for Hardenability of Steel
ASTM A 255
*
ASTM E 381
Macroetched Steel, Rating
(Application for copies of the ASTM standards by serial designation
and title should be made to the American Society for Testing and Materials,
1916 Race Street, Philadelphia, Pa, 19103.)
3,
REQUIREMENTS
3.1 Preproduction sample, When specified in the contract or order,
a preproduction sample shall be manufactured using the procedure pro-
posed for the production lot, The sample shall consist of sufficient
material from each heat to perform the tests of 4.4 and shall be tested,
as specified herein, for the purpose of determining, prior to starting
production, that the suppliers production methods are capable of
yielding bars and forgings that comply with the technical requirements
of the contract, Any production of steel prior to approval of the pre-
s
production sample shall be at the contractor risk,
3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |