 |
|||
|
Page Title:
Figure 1. Dimensions and configuration - Cont'd |
|
||
| ||||||||||
|
|  MIL-S-8805/50D
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.005
0.13
.098
2.49
.562
14.28
.875
22.23
.010
0.25
.125
3.18
.565
14.35
.938
23.83
.015
0.38
.193
4.90
.575
14.61
1.031
26.19
.025
0.64
.250
6.35
.594
15.09
1.125
28.58
.031
0.79
.281
7.14
.621
15.77
1.219
30.96
.047
1.19
.312
7.92
.655
16.64
1.281
32.54
.062
1.57
.375
9.53
.656
16.66
1.312
33.32
.070
1.78
.422
10.72
.708
17.98
1.563
39.70
.080
2.03
.438
11.13
.725
18.42
1.781
45.24
.085
2.16
.500
12.70
.805
20.45
1.875
47.63
.094
2.39
.554
14.07
.812
20.62
2.562
65.07
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is .015 (0.38 mm), except .005 (.127 mm) for ferrule and seal
gland.
4. The "A" pin shall be permanently indicated with a circle.
5. One hole on small end of gland shall be permanently marked with a circle, to be mounted on "A" pin.
6. The circuit and the terminal arrangement shall be marked on the switch case.
7. The dimensions of the electrical conduit coupling nut shall be in accordance with AN3054-8 or
equivalent. Alternative base metals and protective finishes, as approved by the qualifying activity, may
be used.
FIGURE 1. Dimensions and configuration - Continued
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals