|
| ![]() MIL-S -8805/59D
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerance is .020.
4. Actuator configuration optional within the specified envelope dimensions.
5. Functionally equivalent mounting hardware, as approved by the qualifying activity, may be provided.
FIGURE 1. Dimensions and configuration - Continued
REQUIREMENTS:
Dimensions and configuration: See figure 1. The switch actuator shall accommodate basic sensitive
switches M8805/1-008.
Enclosure design: 1 (unsealed).
Temperature characteristic: 1 (-55C to +85C).
Shock type: M (100 g's).
Sinusoidal vibration: 10 to 55 Hz in accordance with MIL-STD-202, method 201.
Weight: 0.07 pound maximum.
Operating characteristics with switch installed:
Actuating force: 12.5 2.5 ounces.
Pretravel: .188 inch maximum.
Overtravel: .500 inch minimum.
Full overtravel force: 2 pounds maximum.
Spring force: 2 pounds minimum.
Salt spray: Method 101 of MIL-STD-202, test condition B (48 hours).
Mechanical endurance: 50,000 cycles.
Qualification: The actuator shall be tested to the requirements of this specification sheet only with
M8805/1-008 switch installed.
Quality conformance:
Group A inspection: The materials and physical dimension requirements may be verified through in-
process controls and inspections.
Group B inspection: Not applicable.
Part or Identifying Number (PIN): AN3169-1.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |