 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-11663K
3.4.12.1 Periscope. When specified for type II (see 6.2), a periscope type mirror screen shall
be installed in the ceiling of the cab to enable the operator to view the container during all
operating positions.
3.4.13 Steering. Power steering shall be furnished.
3.4.14 Windshield wipers and washers. The vehicle shall be equipped with dual windshield
wipers and windshield washers. Windshield wipers shall be of the multispeed type operated by
either air or electric motor(s).
3.4.15 Bumper. Unless the bumper is an integral part of the vehicle cab, a channel type front
bumper shall be provided on type I vehicles. On type II vehicles, front counterweights, when
used, shall serve as a front bumper (see 3.5.2.3).
* 3.4.16 Tool stowage. Stowage space of sufficient size to accommodate hand tools, antiskid
chains and emergency reflective triangles shall be furnished for retaining equipment during vehicle
operation. Stowage space for these tools and equipment may be furnished in the cab. When
stowage space for these tools is located outside of the cab, it shall be weatherproof and shall
provide for locking with a padlock or a key operated lock.
3.4.17 Heater and defroster. The vehicle shall be provided with a hot water heater with fresh
air intakes and discharge outlets to the floor and to windshield defroster louvers. The heater shall
be complete with a blower and mounted controls convenient to the driver.
3.4.18 Controls and operating mechanisms. All controls and operating mechanisms shall be
located for left-hand drive. Controls shall be complete and conveniently operable by the driver.
Lever controls shall be designed and located to permit easy entrance and exit of the operator to
and from the driver's compartment. Instruments and controls shall be identified as to their
function and installed in a manner to facilitate removal and servicing. All instruments shall be
panel mounted and visible to the driver when seated in a driving position.
3.4.19 Accessories and equipment. Chassis equipment shall be complete with all accessories
furnished as standard equipment by the manufacturer. The following minimum equipment shall be
furnished:
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals