 |
|||
|
Page Title:
Standard vehicle and accessories |
|
||
| ||||||||||
|
|  MIL-T-12407X(AT)
(Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be available in
or through libraries or other informational services.)
*
2.3 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
*
3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.10, the
vehicle, components, assemblies, and accessories to be delivered under the contract shall be
standard or optional items, which meet or exceed the requirements of this specification. Except
as specified in 3.1.1 through 3.1.1.10, no removal, substitution, or alteration of the chassis
manufacturer's standard or optional chassis model components shall be made. All chassis items
shall be as represented in the chassis manufacturer's technical data book. Special bodies or
mounted equipment shall be as represented in the body and equipment manufacturer's technical
data. Technical data shall be limited to specifications and technical material identical to that
furnished to the authorized company representatives for selection of vehicle models and
components, and shall be available to the engineering offices of the procuring activity, prior to
delivery of the items. The model furnished shall be not older than the manufacturer's current
model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
3.1.1.1 Painting and marking. Treatment, painting, marking and data plates shall be in
accordance with MIL-STD-1223. The exterior color and identification markings shall be in
accordance with the requirements of MIL-STD-1223 for the military service identified by the
procuring activity (see 6.2), except the exterior color of the vehicle shall be gloss white, matching
color chip No. 17886 of FED-STD-595. The grill brushguard, and mirror frame and mountings
shall be furnished in bright finish metal if available as the manufacturer's standard or option.
Markings other than identification markings shall be as specified by the procuring activity
(see 6.2).
*
3.1.1.2 No smoking sign. A sign reading "NO SMOKING IN MEDICAL VEHICLES"
shall be prominently displayed in the driver's compartment. The sign shall be not less than
3.500 inches high and 5 inches wide. The letters shall be red on a contrasting background.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals