Click here to make tpub.com your Home Page

Page Title: Carrier for spare tire assembly
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-12407X(AT)
*
3.4.10.3 Spare tire assembly. Unless otherwise specified (see 6.2), an inflated spare tire
mounted on a spare wheel or rim shall be furnished. The spare tire assembly shall be of the same
size, tread design and load range (ply rating) as the tires furnished on the vehicle.
*
3.4.10.4 Carrier for spare tire assembly. A carrier for a spare wheel or rim and tire
assembly shall be installed in a readily accessible location on the vehicle. The carrier design shall
enable removal or mounting of spare wheel assembly using only tools specified in 3.4.16.
Threaded fasteners, when used to secure the spare tire in the carrier, shall be constructed of or
plated with corrosion-resistant material. If the spare is located in the patient area, it shall be
concealed in a closed compartment covered with the same material as the patient compartment or
shall be concealed with a washable, fire-retardant, vinyl, removable cover. The spare tire
assembly shall be removable from the vehicle without moving the cot with the patient from the
patient compartment.
3.4.11 Brakes. Brakes shall conform to Federal Motor Carrier Safety Regulations 393.40
through 393.42 (except 393.40(b)(1)(i), 393.45 through 393.49 and 393.51. Brake linings shall
be of nonasbestos material. The vehicle shall be equipped with power assisted, hydraulically
actuated, four-wheel service brakes.
*
3.4.11.1 Split hydraulic brake system. The power-hydraulic brake system shall be so
arranged as to provide separate systems for at least two wheels and so designed and constructed
that rupture or leakage type failure of any single pressure component of the service brake system,
except structural failures of the brake master cylinder body, effectiveness indicator body, or other
housing common to the divided system, will not result in complete loss of function of the vehicle
brakes when force on the brake pedal is continued. "Pressure component" means any internal
component of the brake master cylinder or master control unit, wheel brake cylinder, brake line,
brake hose, or equivalent, except power assist components.
*
3.4.11.2 Indicator light. The split hydraulic brake system shall be equipped with an
electrically operated red light mounted on the instrument panel to indicate system effectiveness.
The light shall have an area of not less than 0.196 square inch. It shall illuminate before or upon
application of the brakes when an actuating-pressure component of the system has sustained a
loss of pressure. The indicator light system shall include a means for testing by the vehicle
operator to assure that the light bulb is operable.
3.4.12 Steering. Power steering shall be furnished.
3.4.13 Windshield wipers and washers. The vehicle shall be equipped with dual
windshield wipers and windshield washers. The windshield wipers shall be the multispeed type
and shall be operated by electric motor(s).
15

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business