 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-18232B(AS)
3.13.10
UMBILICAL CORD RECEPTACLE. - A receptacle shall be provided
for attachment of an umbilical cord to the target for pre-
launching tests of the control functions, and for launching the target as required.
3.13.11
EQUIPMENT COOLING. - Cooling shall be provided for all
electrical equipment in accordance with the specifications
covering that equipment. In the case of blast cooled electrical equipment the
cooling airflow shall be unidirectional under all target operating conditions and
the air duct shall be of rigid nonporous material except that flexible connections
will be allowed as necessary to meet the installation requirements. When blast-
cooled generators are specified, the cooling installation shall meet the require-
ments of Specification MIL-C-8678.
3.13.12
EXTERIOR LIGHTNING. - An exterior lighting system for visual
tracking of the target shall be installed when specified.
3.14
ELECTRONICS
3.14.1
DESCRIPTION. - Electronic equipment includes the remote and/or
programmed control; telemetering; radomes; antennas; altitude
control devices; destructor actuator devices; beacons; IFF and shoo-away devices;
stabilization system and such other electronic devices as may be specified in the
detail specification. Unless otherwise specified, electronic equipment shall be
in accordance with Specification MIL-E-8189 or MIL-E-5400 as specified in detail
specification.
INSTALLATION. - Electronic equipment installations shall be
3.14.2
in accordance with Specification MIL-E-25366 insofar as
applicable and detail equipment installation specifications and drawings. Where
detail equipment installation specifications and drawings are not available, GFE
installations shall be made in accordance with applicable equipment handbooks or
such other instructions as maybe furnished or approved by NAVAIR. Electronic
equipments shall be as listed in the detail specification.
3.14.3
PERFORMANCE. - The entire electronic equipment installation
shall provide acceptable performance as defined by the
applicable detail equipment test specifications, equipment handbooks, and such
other information as may be furnished or approved by NAVAIR.
3.14.4
CONTRACTOR FURNISHED ELECTRONIC EQUIPMENT. - Contractor
furnished electronic eqipment shall conform to, and shall
withstand, environmental conditions required by the detail specification.
3.14.5
REMOTE AND/OR PROGRAMMED CONTROL EQUIPMENT. - The remote and/or
programmed control equipment shall include radio control
receivers and remote and/or preset control devices for terminating flight.
42
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals