 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-18232B(AS)
3.16
MISCELLANEOUS EQUIPMENT
3.16.1
COMPONENTS. - Miscellaneous equipment includes heating and
ventilating equipment, insulation, ballast, etc.
3.16.2
HEATING AND VENTILATING. - Thermal environmental conditions
within equipment compartments shall be controlled in accord-
ance with Specification MIL-H-18325.
3.16.3
INSULATION. - Suitable thermal insulation shall be installed
when required by the detail specification and shall be in
accordance with Specification MIL-I-7171.
3.16.4
BALLAST. - When required for balance purposes, ballast shall
be furnished and installed by the contractor. Ballast is
considered part of mission. Ballast shall be securely attached to the target
structure.
3.16.5
ANTI-ICING. - Anti-icing provisions shall be in accordance
with Specification MIL-T-18607 or Specification MIL-D-8804
as applicable.
3.17
HANDLING PROVISIONS. - Handling provisions include provisions
for hoisting and jacking.
3.17.1
HOISTING PROVISIONS. - All targets shall be provided with
fittings for attachment of slings to petit hoisting, lifting
and handling the complete target on the ground, on a handling truck, or onto the
launching device. Hoisting fittings also shall be provided on wing panels, tail
surfaces, and other components when the weight is great enough to make manual
handling for maintenance operations impracticable. Handling provision may consist
of inherent or built-in strong points in the fuselage structure. Such points
shall be suitably marked.
JACKING. - Provision shall be made for jacking when specified
3.17.2
in the detail specification.
3.18
SAFETY. - Safety requirements shall be in accordance with
Weapons specification WS-4613.
3.19
WORKMANSHIP. - Workmanship shall be of a quality to insure
safety, proper operation and service life. Workmanship shall
be subject to the inspection and approval of the cognizant inspection activity.
45
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals