 |
|||
|
Page Title:
Bolts, nuts, screws, studs, and other threaded fasteners |
|
||
| ||||||||||
|
|  MIL-T-2211E
3.5.3 Bolts, nuts, screws, studs, and other threaded fasteners.
Threaded fasteners shall not be broken, stripped, fractured, or loose.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified In the
contract or purchase order, the supplier is responsible for the performance
of all Inspection requirements as specified herein. Except as otherwise
specified In the contract or order, the supplier may use his own or any other
facilities suitable for the performance of the inspection requirements specified
herein, unless disapproved by the Government. The Government reserves the right
to perform any of the inspections set forth in the specification where such in-
spections are deemed necessary to assure supplies and services conform to pre-
scribed requirements.
*
4.2 First article Inspection. When a first article is required, it shall be
examined for defects listed in table II and specified dimensions. The presence
of any visual defect , any dimension not within specified requirements, shall be
cause for rejection of the first article.
4.3 Inspection. Sampling for inspection shall be performed in accordance
with MIL-STD-105, except where otherwise indicated hereinafter.
4.3.1 Inspection of materials and components. In accordance with 4.1 above,
components and materials shall be inspected and tested in accordance with all
the requirements of referenced specifications, drawings and standards unless
otherwise excluded, amended, modified or qualified in this specification, or
applicable purchase document.
4.3.2 In-process inspection. Examination shall be made during the
manufacturing for the requirements specified in table I to establish that
no deviation is made from the indicated requirements. When nonconformance
is noted, correction shall be made to affected items in process.
TABLE I.
In-process inspection
4.3.3 End item inspection. A lot shall consist of all tables offered
for inspection at one time. The sample unit shall be one completely fabri-
cated folding laundry table.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals