 |
|||
|
Page Title:
Examination of preparation for delivery |
|
||
| ||||||||||
|
|  MIL-T-2211E
TABLE II.
Classification of defects (cont'd)
4.3.3.2 Dimensional examination. Inspection shall be made of the end
item for compliance with dimensions specified. Any deviation from specified
requirements shall constitute a defect. The inspection level shall be S-2
with an AQL of 4.0 total defects, expressed in terms of defects per hundred
units.
4.3.4 Examination of preparation for delivery. An examination shall
be made to detemine that packaging, packing and marking required bY
section 5 of this specification are complied with. Defects will be
recorded as listed in table III. The sample unit shall be one shipping
container fully prepared for delivery, except that it need not be sealed.
The lot shall be the number of containers offered for delivery at one time.
The inspection level shall be S-2 and the AQL shall be 4.0 expressed in
terms of defects per hundred units.
TABLE III.
Examination of preparation for delivery
PREPARATION FOR DELIVERY
5.
Packaging shall be level A or C as specified (see 6.2).
5.1 Packaging.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals