 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-2452J
3.2.6 Weight distribution. The distribution of the GVW for the purpose of establishing
suspension, axle and tire capacities shall be determined with the payload uniformly distributed
over the load area.
3.2.7 Ratings. Vehicle ratings shall be the manufacturer's published ratings.
Component and vehicular ratings shall not be raised to meet the requirements of this
specification. When published ratings are not available, verification of ratings must be available
to the engineering office of the procuring activity. The minimum GVW shall conform to table I
for the specified class of vehicle.
3.2.8 Cab-to axle dimension. The cab-to-axle dimension shall conform to that
recommended by the refuse collection body manufacturer for conformance to this specification.
3.2.9 Width. The overall width of the vehicle, exclusive of mirrors, lights, reflectors and
tires, shall not exceed 96 inches. The width over the tires shall be not more than 100 inches.
*
3.2.10 Accessibility. The design of the vehicle and optional equipment shall permit
access for routine servicing and shall permit access for replacement and adjustment of
component parts and accessories with minimal disturbance of other components and systems.
3.3 Performance.
3.3.1 Speeds and gradeability. High and low speed requirements shall be met with
vehicle loaded to the specified GVW.
3.3.1.1 High speed gradeability. The vehicle shall ascend grades specified in table II at
50 miles per hour (mph). Gradeability requirements shall be met with the main transmission in
direct drive. Gradeability shall be verified with calculations in accordance with SAE J688
(see 6.3).
TABLE II. Gradeability.
Vehicle class
Percent grade
A
1.0
B
1.0
C
1.0
D
0.5
E
0.5
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals