Click here to make tpub.com your Home Page

Page Title: Rejection and retest
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-26219A
4.4  Quality conformance inspection.
Quality conformance inspection shall
consist of the following:
Individual tests (see 4.4.1)
a.
b.
Sampling tests (see 4.4.2)
4.4.1 Individual tests.  Each test shall be subjected to the following
tests as described under 4.6 Test methods:
a.
Examination of product
b.
Operation at room temperature
Resistance load - output voltage
c.
4.4.2 Sampling plans and test.
4.4.2,1 Sampling plan A.  One test set selected at random from each 50 or
less produced on the contract or order shall be subjected to the following
test as described under 4.6 Test methods:
Individual tests
Low temperature
c.
High temperature
4.4.2.2 Sampling plan B.  Unless otherwise specified, 1 test set selected
at random from the first  10 items of the contract or order shall be subjected
to the following tests as described under 4.6 Test methods:
a.
Sampling plan A
b.
Vibration
Endurance
c.
d.
Humidity
4.4.2.3 Rejection and retest.  When one item selected from a production
run fails to meet  he specification, no items still on hand or later produced
shall be accepted until the extent and cause of failure are determined.  After
corrections have been made, all necessary tests shall be repeated.
4.4.2,3.1 Individual tests
may continue.
For operational and production
reasons, individual tests may
be continued pending the investigation of a
sampling test failure.  Final
acceptance of items on hand or later produced
shall not be made until it is
determined that items meet all the requirements
of the specification.
4.4.3 Defects in items already accepted. The investigation of a test
failure could indicate that defects may exist in items already accepted. If
so, the contractor shall fully advise the acquiring activity of all defects
likely to be found and methods of correcting them.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business