 |
|||
|
Page Title:
Dielectric withstanding voltage |
|
||
| ||||||||||
|
| MIL-T-27/187C
Tape:
Backings: Polyamide film, glass cloth, aramid paper, +220C.
Adhesive: Silicone, +180C.
Bobbin: Aramid, +220C.
Housing: Diallyl phthalate, +180C.
Terminal strength: MIL-STD-202, method 211, test condition A, 5 pounds.
Vibration, high frequency: MIL-STD-202, method 204, test condition D.
Salt spray (corrosion): MIL-STD-202, method 101, test condition B.
Dielectric withstanding voltage:
At sea level: 500 volts rms.
At barometric pressure: 300 volts rms.
Electrical characteristics:
No load: With 115 volts rms, 400 hertz across (COM-HV).
Current in (COM-HV): 150 milliamperes maximum.
Power in (COM-HV): 2.9 watts maximum.
Voltage across (BLK-WHT): 13.7 volts rms 2 percent.
Rated load: With 115 volts rms, 400 hertz across (COM-HV)
Voltage across (BLK-WHT): 12.5 0, +0.4 volts rms at an ambient temperature of +70C.
Voltage across (BLK-WHT): 12.5 0, +0.7 volts rms at an ambient temperature of +25C.
Temperature rise: +100C with 115 volts rms, 400 hertz across (COM-HV) at an ambient temperature of +70C.
Voltage regulation: 10 percent maximum.
Quality assurance provisions:
Qualification inspection: Not applicable.
Quality conformance inspection: Groups A and B tests of MIL-PRF-27 shall be applicable.
Marking location: See figure 1.
Part or Identifying Number (PIN): M27/187-01.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals