 |
|||
|
Page Title:
Production truck fire pump tests |
|
||
| ||||||||||
|
|  MIL-T-28571G(NAVY)
c.
Steering mechanism shall be tested to verify conformance to the
requirements of 3.8.14.
During these tests, the functioning of the engine, power train, brakes, truck
and body lighting systems, controls and instruments shall be observed for
effective operation.
4.5.1 Production truck fire pump tests. The fire pump on each production
truck shall be tested in accordance with the requirements of 4.4.2. 3. Meter
readings of all tests performed shall have the results recorded on the Apparatus
Pump/Service Test Report form and delivered in accordance with DD Form 1423
requirements.
4.5.2 Production truck foam system test. The foam and monitor system on
each production truck shall be tested in accordance with 4.4.3 and 4.4.3.1,
except water may be used in lieu of foam concentrate in the foam tank. All
tests performed shall have the results recorded on the Apparatus Pump/Service
Test Report form and delivered in accordance with DD Form 1423 requirements.
4.6 Packaging inspection. The preservation, packing and marking of the
truck shall be inspected to verify conformance to the requirements of section 5.
5.
PA CKAGING
5.1 Vehicle Processing, The equipment shall be preserved and packed in
accordance with the contractor's standard practice. When specified (see 6.2),
equipment shall be preserved and packed in accordance with the mobile
requirements of MIL-V-62038, with the level of preservation and packing as
specified (see 6.2).
.
..
32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals