 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-425J
5.2.1.2 Size 12-inch pipeline sections. The 12-inch pipeline sections shall be shipped loose.
5.2.2 Level B. Unless otherwise specified (see 6.2), the pipeline sections shall be shipped
loose. When specified, 2-, 4-, 6-, and 8-inch nominal size pipeline sections shall be bundled as
specified for level A, except flat steel straps shall not be required to be finish B.
5.2.3 Commercial. Pipeline sections shall be bundled or shipped loose, as specified (see 6.2),
in a manner to assure carrier acceptance and safe delivery to the destination at lowest ratings in
compliance with Uniform Freight Classification rules or National Motor Freight Classification
rules.
5.3 Marking.
5.3.1 Military. Marking for shipment and storage shall be in accordance with MIL-STD-129.
5.3.2 Commercial. Marking for commercial packaging shall be in accordance with
ASTM D 3951.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1 Intended use. The pipeline sections are primarily intended for use as military pipelines for
conveying liquid petroleum products.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Issue of DoDISS to be cited in the in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.1)
c. Size of pipeline sections required (see 1.2).
d. Time frame required for submission of first article and number of pipeline sections to be
furnished (see 3.2).
e. Treatment, painting, type of paint or color if other than as specified (see 3.8).
f. When exterior coating of asphalt varnish is required (see 3.8.1).
g. When oil coating of interior surface is not required (see 3.9).
h. Level of packing required (see 5.2).
i. When bundling of 2-, 4-, 6-, and 8-inch pipeline sections is required for level B
(see 5.2.2).
j. Whether pipeline sections are to be shipped loose or bundled for commercial (see 5.2.3).
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals