 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-43578B
Classification of defects (cont'd)
TABLE I.
Classification
Minor
Defect
Major
Examine
X
Design and con-
Any part missing or not specified type
X
Sharp edge, burr, or sliver
struction and work-
Split, punctured, torn, dented,
manship, general
deteriorated or malformed
X
(applicable to all
components and
assemblies)
Not manufacturer's commercial practice
Marking
X
Missing, incomplete, burn holes,
Welding and
fractured, or not fused
brazing
X
Slag inclusion, undercut, not
smooth and uniform, or deposit
of scale and flux not removed
X
Missing, broken, stripped, or
Bolts, nuts, screws,
studs , and other
fractured
X
threaded fasteners
Threaded fastener loose
X
Missing, broken, not peened or
Rivets
not peened sufficiently
X
Rivets loose
X
Wiring cut, abraded, insulation
Electrical apparatus
wiring
stripped, not properly joined
or loose at terminals
X
Not inclosed in specified con-
X
duit where required
Adequate slack not provided for
wiring to relieve strain
X
Missing, incomplete, not legible
Marking for
X
identification
4.2.2.2 Testing of the end item. The first produced end item shall be
tested as specified in 4.3.1 through 4.3.5 and, when applicable 4.3.6.
Remaining end items of the same lot shall be tested as specified in 4.3.1
and 4.3.2. Failure to pass tests shall be cause to reject the effected
end item.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals