Click here to make tpub.com your Home Page

Page Title: Five mil click lead mechanism
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-46313B(MU)
3.8.2.4 Level travel- Starting with the line of sight in coincidence
with a horizontal target, the line of sight shall track the target within
6.0 mils (total excursion) when rotated through two full revolutions.
3.8.2.5 Lift.- Vertical displacement of the line of sight due to
reversing rotation by means of the azimuth knob shall not exceed 1.0 mil.
3.8.2.6 Five mil click lead mechanism.- Positioning Knob 8587442
to indicate DIRECT shall cause a detent action to be felt when introducing
5.0 0.5 mil increment changes into the 6400 mil counter. This require-
ment shall be met at standard and extreme operating temperatures.
3.8.3 Counter mechanism.
3.8.3.1 Rapid traverse.- The reset counter shall follow the azimuth
counter within 0.25 mil when the knob is rotated at 200 rpm for one
minute.  The gunner's aid counters shall remain at zero.
3.8.3.2 Reset counter.- The reset counter shall be resettable to
3200 0.25 mils from any reading.
3.8.3.3 Gunner's aid counters.
3.8.3.3.1 Excursion range.- The gunner's aid counters shall have a
minimum of 50 mils excursion on the "L" and "R" scales.
3.8.3.3.2 Settings.- Setting 50 mils on the "L" scale shall decrease
the reset counter reading by 50 0.5 mils.  Setting 50 mils on the "R"
scale shall increase the reset counter reading by 50 0.5 mils.  There
shall be no change in the azimuth counter readings when the 50 mils values
are set into the gunner's aid counters.
3.9 Operability.- The boresight adjustment shaft, rheostat knob,
azimuth counter door and latch, positioning of crank, positioning of Knob
8587442, and the spring action of the electrical contact shall be operable
at standard and extreme operating temperatures.
3.9.1 Torque.- The running torque required to operate the following
knobs shall be within the values specified for standard temperature and
shall not exceed the values specified for extreme operating temperatures.
The torque values for the azimuth knob shall be met with Knob 8587442
indicating INDIRECT (out of detent).
-40 and +150F(Extreme
60 to 90F (Standard
Operating Temperatures)
Knob
Temperature)
9
in.
-
lbs.
AZimuth
2
to
6 in. - lbs.
-
ozs.
54
In.
10
to
30 in. - ozs.
Gunner's aid
18
in.
-
ozs.
5
to
10 in. - ozs.
Reset Counter
10
to
48 in. - OZS.
86
in.
-
ozs.
Elevation
5.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business