|
| MIL-T-46590C
103
Thickness of wall
Gage
104
Metal defective
Visual
Minor
201
Total length
Gage
202
Location of small hole
Gage
203
Surface finish improper
Visual
4.5.2.15 Inlet, Reservoir, Drawing 10520894, covering a detail of Drawing 10520890.
Critical
None defined
Major
101
Concentricity of center hole with counterbore
Gage
102
True position of radius at center hole
Gage
103
True position of counterbore at center hole
Gage
104
True position of holes at ends
Gage
105
Center line of segments in degrees
Gage
106
Diameter of counterbore, center hole
Gage
107
Diameter of center hole
Gage
108
Inside radius
Gage
109
Depth to bottom of counterbore, center hole
Gage
110
Metal defective
Visual
111
Surface finish improper
Visual
Minor
201
Diameter of clearance cut, center hole
Gage
202
Depth of clearance cut, center hole
Gage
203
Diameter of counterbores, end holes
Gage
204
Depth of counterbores, end holes
Gage
205
Thickness
Gage
206
Location of end holes
Gage
207
Burr or sharp corners
Visual
208
Foreign matter
4.5.2.16 Strap, Drawing 10520899, covering a detail of Drawing 10520890.
Critical
None defined
Major
101
True position of holes
Gage
102
Metal defective
Visual
Minor
201
Diameter of holes
Gage
202
Length
Gage
15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |