 |
|||
|
Page Title:
Body, Drawing 10520976, covering a detail of Drawing 10520974 |
|
||
| ||||||||||
|
| MIL-T-46605B
104
Minor diameter of thread, inlet port, max
Gage
105
Pitch diameter of thread, by-pass port, max
Gage
106
Minor diameter of thread, by-pass port, max
Gage
107
Concentricity of large cavity with long cavity
Gage
108
Concentricity of the small end of the counterbore with bore
Gage
109
Concentricity of lugs
Gage
110
Concentricity of bore with long cavity
Gage
111
Concentricity of grooves with bore
Gage
112
Concentricity of pin holes
Gage
113
True position of pin holes
Gage
114
True position of lugs
Gage
115
Diameter of long cavity, max
Gage
116
Diameter of bore, max
Gage
117
Diameter of lugs, min
Gage
118
Diameter of pin holes
Gage
119
Diameter of cavity, inlet port
Gage
120
Diameter of grooves
Gage
121
Depth to bottom of large cavity, max
Gage
122
Depth of counterbore, inlet port
Gage
123
Depth of counterbore, by-pass port
Gage
124
Depth of effective thread, inlet port, min
Gage
125
Depth of effective thread, by-pass port, min
Gage
126
Depth to large cavity
Gage
127
Length of thread, inlet port, max
Gage
128
Length of thread, by-pass port, max
Gage
129
Location of lugs
Gage
130
Location of inlet port
Gage
131
Angle of chamfer, inlet port
Gage
132
Angle of chamfer, by-pass port
Gage
133
Angular location of hole, inlet port
Gage
134
Diameter of chamfer, inlet port
Gage
135
Diameter of chamfer, by-pass port
Gage
136
Diameter of relief undercut
Gage
137
Diameter of undercut, long cavity, if applicable, max
Gage
138
Profile of grooves
Gage
139
Internal radii forward end long cavity
Gage
140
Radii at base of lugs
Gage
141
Thread damaged or not full
Visual
142
Metal defective
Visual
143
Protective finish inadequate or defective
Visual
144
Surface finish of large cavity, long cavity and angles
Visual
in gas ports, improper
145
Burr or sharp corners
Visual
146
Foreign matter
Visual
Minor
201
Pitch diameter of large thread, min
Gage
202
Pitch diameter of thread, inlet port, min
Gage
203
Pitch diameter of thread, by-pass port, min
Gage
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals