 |
|||
|
Page Title:
Box, Fiberboard (Outer), Alternative, Packing, Ammunition, Drawing 9217557 |
|
||
| ||||||||||
|
| MIL-T-46691B
Major
None defined
Minor
201 Contents loose Visual/Manual
202 Strapping missing, loose, broken, or improperly assembled
Visual/Manual
203 Contents of box exposed Visual
204 Box damaged Visual
205 Marking missing, incorrect, or illegible
Visual
206 Number of units incorrect Visual
4.5.2.15 Box, Fiberboard (Outer), Alternative, Packing, Ammunition, Drawing 9217557.
Critical
None defined
Major
None defined
Minor
201 Contents loose Manual/Visual
202 Carton broken or damageVisual
d
203 Number of units incorrect Visual
204 Marking missing, incorrect, or illegible
Visual
205 Tape incomplete
Visual
4.5.3 Inspection testing. The following tests shall be performed in accordance with 4.6.
4.5.3.1 Hardness. Fifty units from each heat treated lot of components shall be tested for
compliance with the requirements on the applicable drawing. Failure of any unit to comply with
the drawing requirements shall be cause for rejection of the lot of components.
4.5.3.2 Hydrostatic pressure. Each cylinder and head shall be subjected to the hydrostatic
pressure test. Failure of any cap or chamber subassembly to comply with 3.4 shall be cause for
rejection of the subassembly.
4.5.3.3 Fluid leakage. Each subassembly shall be subjected to a fluid leakage test. If an
appreciable amount of fluid accumulates after the minimum test period, the unit shall be rejected.
If after the minimum test period there is only a thin film of fluid covering the piston face, then
the piston face shall be wiped clean and the subassembly retested for another minimum period.
4.5.3.4 Presence of piston shear pin. Each assembly shall be subjected to a test to determine
the presence of a shear pin in the piston lock. Failure of any unit to comply with the requirements
of 3.6.3 shall be cause for rejection of the unit.
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals