 |
|||
|
Page Title:
Other Government documents, drawings and publications |
|
||
| ||||||||||
|
|  MIL-T-46765(AT)
* 2.1.2 Other Government documents, drawings and publications. The following other
Government documents, drawings and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues shall be those in effect on the date of the
solicitation.
*
DEPARTMENT OF DEFENSE
Department of Defense Index of Specifications and Standards (DODISS).
(Copies of the DODISS are available on a yearly subscription basis either from the
Government Printing Office for hard copy, or microfiche copies are available from the Director,
Navy Publication and Printing Service Office, 700 Robbins Avenue, Philadelphia,
PA 19111-5093.)
DEPARTMENT OF TRANSPORTATION (DoT)
Federal Motor Carrier Safety Regulations.
Federal Motor Vehicle Safety Standards.
* (Application for copies of DoT publications should reference the Code of Federal
Regulations, 49 CFR, and the Federal Register, and should be addressed to the Superintendent of
Documents, U.S. Government Printing Office, Washington, D.C. 20402.)
ENVIRONMENTAL PROTECTION AGENCY (EPA)
Control of Air Pollution from New Motor Vehicles and New Motor Vehicle Engines.
Noise Emission Standards for Transportation Equipment -Medium and Heavy Trucks .
(Application for copies of EPA publications should reference the Code of Federal
Regulations, 40 CFR, and the Federal Register and should be addressed to the Superintendent of
Documents, U.S. Government Printing Office, Washington, D.C. 20402.)
* 2.2 Non-Government Publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of the documents which are
DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless
otherwise specified, the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
*
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D 4985
- Standard Specification for Low Silicate Ethylene Glycol
Base Engine Coolant for Heavy Duty Engines Requiring an
Initial Charge of Supplemental Coolant Additive.
(Application for copies of ASTM publications should be addressed to American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals